skip to main text

Turning the Printer On and Off

Checking that Power Is On

The ON lamp is lit when the printer is turned on.

Even if the LCD is off, if the ON lamp is lit, the printer is on.

Note

  • The LCD will turn off if the printer is not operated for about 3 minutes. To restore the display, press any button or perform the print operation.

Turning on the printer

Press the ON button to turn on the printer.

Note

  • It may take a while for the printer to start printing immediately after you turn on the printer.

  • You can set the printer to automatically turn on when a print operation is performed from a computer connected by USB cable or via network. This feature is set to off by default.

Turning off the printer

  1. Press the ON button to turn the printer off.

  2. Check that both the ON lamp and LCD display are off.

    Important

    • When you unplug the power cord, press the ON button, then confirm that the ON lamp is off. Unplugging the power cord while the ON lamp is lit or flashing may cause drying or clogging of the print head and print quality may be reduced.